This fiberglass engine shroud is a great replacement for your missing or cracked factory piece. Note: this does not have the oil cooler duct; may not work with some models. Make sure to examine your existing shroud before ordering. This is a special order part.

General Fitment

Redstuff brake pads offer significant reduction in stopping distances compared to oe pads. They also reduce annoying brake dust by 60-90%. Plus, the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fiber particles like other pads. The material used in these pads is a kevlar fiber-based brake compound enhanced with ceramic particles. It lasts longer, brakes better and is considerably quieter than OEM or other aftermarket pads. Redstuff pads contain a brake-in coating that accelerates the bed in period. This is a truly impressive high-performance pad for modified European cars, even under repeated heavy braking. Highlights: made for up to 750*c (1,382*f) for street, so...(choose a part on the right to read more)

Pagid yellow rsl 29 are from the rsl line of endurance racing brake pads. They are a medium friction coefficient racing compound with long pad and disc life, and are easily bedded in. Rsl 29 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and offer excellent release characteristics. Rsl29 pads offer low heat conductivity and work well with abs systems. They offer excellent modulation and controllability. They offer lower disc wear rates and are fade resistant up to a temperature of 650*c (1,202*f). Applications include: club racing, track days, touring cars, prototype endurance racing and GT cars. Features at a...(choose a part on the right to read more)

Pagid red rst 1 are from the rst line of circuit racing / sprint racing brake pads. They are a high friction coefficient compound with high initial bite. Rst 1 pads have high temperature resistance, a progressive torque curve and are very fade resistant. They are a semi metallic resin bonded material containing steel and acrylic fibers. Rst 1 pads offer medium pad life and relatively high disc life with moderate modulation. They are suitable for heavy cars where high torque is necessary. Applications include: rally tarmac, GT cars, touring cars, nascar and high downforce formula cars. Features at a glance: very high friction coefficient high initial bite progressive torque curve very fade resistant medium modul...(choose a part on the right to read more)

Pagid yellow rsl 29 are from the rsl line of endurance racing brake pads. They are a medium friction coefficient racing compound with long pad and disc life, and are easily bedded in. Rsl 29 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and offer excellent release characteristics. Rsl29 pads offer low heat conductivity and work well with abs systems. They offer excellent modulation and controllability. They offer lower disc wear rates and are fade resistant up to a temperature of 650*c (1,202*f). Applications include: club racing, track days, touring cars, prototype endurance racing and GT cars. Features at a...(choose a part on the right to read more)

914 front GT valance, just like the factory original! This high quality fiberglass molded piece is perfect for the guy wanting to achieve the original GT look of the famous 914-6 racing cars. easily painted and bolted on, allows a big opening for the GT front mounted oil cooler. For stock fendered- 914s.
The lead time on this part is 4-6 weeks.

General Fitment

Tired of having to wash the car just due to brake dust build up? Ebc redstuff brake pads have you covered. They reduce brake dust by 60-90%, plus the minimal dust is safely removed with a wet sponge as redstuff does not contain steel fiber particles found in other pads. These pads also have excellent brake friction when cold and just get better as they warm up. The pads are composed of a kevlar fiber-based brake compound enhanced with ceramic particles. The benefits of this material are longevity, enhanced braking performance, quiet operation and reduced brake dust. Features: made for up to 750*c (1,382*f) for street, track and rally use. Low dust, high performance street pad with 20-25% braking improvement. Ca...(choose a part on the right to read more)

Will incur higher shipping rates. This is a fiberglass race car part, if cosmetics are important it will need a lot of massaging.

General Fitment

For 7” and 9” flares.
***note: these rockers have mold parting lines that will show towards each end of the panel. These will need to be filled in and sanded smooth. As with any after market fiberglass part, finishing work is required for proper look and fit.***

Pagid yellow rsl1 are from the rsl line of endurance racing brake pads. They are a high friction coefficient racing compound with long pad and disc life, and are easily bedded in. Rsl1 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and have good friction stability vs. Temperature. Applications include: GT cars, touring cars, prototype racing and in spring racing. Features at a glance: high friction coefficient high bite high fade resistance high pad and disc life high modulation pagid is one of the leading manufacturers of racing brake pads and is successful at the world's most demanding racetracks. They offe...(choose a part on the right to read more)

Brand-new and made from our own precise molds, this fiberglass spoiler is one of our most popular items. It replicates the expensive factory special edition spoiler at a fraction of the cost. Part comes in gel-coated black.
Oversize shipping charge applies. ***note - this is a substitute for our perfect part, as we have temporarily lost our fiberglass guy. some of the mounting points might have to be built up with fiberglass in order to properly mount it to the car.***

View/Change Diagram

914 1970-76 - Body

914 1970-76 - Body

Hood pin kit for the factory GT look hood. Use with fiberglass hood, part number b91451190300.

General Fitment

Achieve the great look of the rare 916 prototype for your 914. Fiberglass bolt-on will also reduce weight. Primed and ready for painting to match your 914. The smooth clean appearance is also aerodynamically efficient! (for stock fenders. Bumper must be slightly modified to fit GT flares.) this part has a lead time of 5-6 weeks.
There will be an extra oversize shipping fee for this part. Please email for shipping quote.

General Fitment

This is an original replacement door panel that is a perfect reproduction made in Germany. Features: period correct material with the correct graining water resistant fiberboard base layer of sound absorption foam perforations are die cut for superior fitment made in Germany sold individually. 1 necessary per car. If you would like a set, the passengers side is part # 993555032700eq

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Made in Germany by a premier manufacturer of motorsport body work. Extremely high-quality, aero-tested, paintable grp (glass reinforced plastic) deck lid with functional GT3 wing. The decklid has functional, yet subtle ram air spoiler incorporated into the design like the GT3. The ram air spoiler increases the velocity of the air into the intake for added performance. This decklid is also available with a polished carbon wing, part # FVD 512 991 GT3 rsc features: produced by a premier German motorsports manufacturer. Motorsport quality standards. Lightweight. Decklid made of high strength, lightweight grp (glass reinforced plastic). Mounts like factory. Includes: grp deck lid grp wing grp end plates aluminum up...(choose a part on the right to read more)

Achieve the great look of the rare 916 factory prototype for your 914. Fiberglass bolt-on will also reduce weight. Primed and ready for painting to match your 914. The smooth clean appearance is also aerodynamically efficient! (for stock fenders. Bumper must be slightly modified to fit GT flares)

Disclaimer: this part was modified years ago to clear the tail pipe so it does not have the pillowed ends

Does not come with hole pre cut.

General Fitment

This is an original replacement door panel that is a perfect reproduction made in Germany. Features: period correct material with the correct graining water resistant fiberboard base layer of sound absorption foam perforations are die cut for superior fitment made in Germany sold individually. 1 necessary per car. If you would like a set, the driver's side is part # 993555031700eq

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

For you serious racers, we offer the one-piece fiberglass hood to cover the headlight boxes. Great for racing where headlights are not required or for the 9014 racers concerned with weight savings. Not for street use
Reminder on this hood that we extend the edges to allow for better alignment. This hood will need additional sanding.
There will be an oversize shipping charge for this part. Please email for a shipping quote to your zip code.

General Fitment

Achieve the great look of the rare 916 factory prototype for your 914. Fiberglass bolt-on will also reduce weight. Primed and ready for painting to match your 914. The smooth clean appearance is also aerodynamically efficient! Lead time of 4-8 weeks.
There will be an extra oversize shipping fee for this part. Please email for shipping quote.

General Fitment

The perfect complement for the GT flares and what was originally installed on the GT and 916. They tie the look of the flares and finish off the bottom of the car off. This part has to be fitted and body worked. Paint them black as they came from the factory or paint them to match the bodywork.
Oversize shipping charge applies. Lead time is 6-8 weeks. ***note: these rockers have mold parting lines that will show towards each end of the panel. These will need to be filled in and sanded smooth. As with any after market fiberglass part, finishing work is required for proper look and fit.***

General Fitment

The heat reduction for exhaust systems with thermal insulation come first in motor sport. By reducing the heat buildup under the vehicle and in the engine compartment cooler air intake temperatures are reached which leads to a noticeable performance increase. Vehicles with increased power produce also higher exhaust temperatures. Exhaust systems with thermal insulation also protected adjacent components from these temperatures. Benefits for thermal insulation: - performance improvement - increasing the efficiency of the engine - cooler air intake - reduce the heat buildup under the vehicle - reduction of fuel consumption - faster response for catalysts (shorter heat cycle) - temperature resistance more than 110...(choose a part on the right to read more)

The racing shell for the newcomer to motor sports.
A shell seat with increased driving comfort thanks to the broader seat cushion and the good side guidance. The particular shell form in the back area also supports the upright sitting posture. The shell is made of fibreglass reinforced plastic (gfk)

Standard features:

integrated headrest for head protection
Lordosis cushions for individual support of the spinal column
Specially designed shoulder support for excellent lateral hold (extras available at extra cost)
Seat shell of glass fiber-reinforced plastic material (grp)
Well-defined seat cushion and seat back bolsters for good vehicle control in all driving situations.
Belt guides for a ...(choose a part on the right to read more)

General Fitment

The racing shell for the newcomer to motor sports.
A shell seat with increased driving comfort thanks to the broader seat cushion and the good side guidance. The particular shell form in the back area also supports the upright sitting posture. The shell is made of fibreglass reinforced plastic (gfk)

Standard features:

integrated headrest for head protection
Lordosis cushions for individual support of the spinal column
Specially designed shoulder support for excellent lateral hold (extras available at extra cost)
Seat shell of glass fiber-reinforced plastic material (grp)
Well-defined seat cushion and seat back bolsters for good vehicle control in all driving situations.
Belt guides for a ...(choose a part on the right to read more)

General Fitment

Its lightweight design is a must for the serious racer. When painted it is hard to distinguish from the factory GT variety. You may want to purchase a set of hood pins part number b91451190300a. This is an oversized item and will have to ship via freight service.

General Fitment

Speedster covers add a more aerodynamic look to your Boxster. Made of molded fiberglass. Installation hardware included. Easily removable.